Version 10 Flash Config 0x00000000 Can Not Continue Can Not Continue

1. 

   nickmo05 Newbie

   Joined:

   Jul 27, 2011

   Messages:

   22

   Likes Received:

   0

   Trophy Points:

   0

   Gender:

   Male

   Location:

   Chicago, IL

   Console:

   Xbox

   Okay here are some pics from a crappy iphone 4 and that is the best I got right now. These pics are of the xbox 360 that I hooked rater up to and the xbox 360 that is not letting me read the nand. I didn't want to make another post so I just put it here. If I should make another post than please let me know. Just want to make sure the connections look okay. I'm not great at soldering but haven't broke anything yet and have repaired a few. So thats good enough for me. 1) With the JAsper 16MB I would like to know if anyone can tell me why it will not read the nand. I have resoldered it many times but remind u I have resoldered numerous times and I have never ever had this much problems reading a nand. I even hooked the falcon up and soldered on the same nandx wires that I was using for the Jasper and it read fine. You will see that in the log. 2) The falcon I would like to use rater to check timing. PLease tell me if I have everything connected properly. Anyhoo...

   http://imgur.com/a/ypHyL
   Images of the Falcon

   http://imgur.com/a/QRngm
   Images of Jasper 16MB

   This first log is of the falcon

   • Console Type: Falcon
   • Programmer Used: JRP v2.0
   • NAND Size: 16
   • Dashboard version: 17349
   • CB Version: 5774
   • Screenshot of NAND details from J-Runner: http://imgur.com/WPII6So
   • J-Runner log: Version: 10
     Flash Config: 0x01198010
     01198010
     Xenon, Zephyr, Opus, Falcon
     CB Version: 5774
     Falcon/Opus
     Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump1.bin
     Reading Nand
     Done!
     in 3:30 min:sec

     Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump2.bin
     Initializing nanddump1.bin..
     Falcon/Opus
     Jtag Selected
     Nand Initialization Finished
     Reading Nand
     Done!
     in 3:30 min:sec

     Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump3.bin
     Comparing...
     Nands are the same
     Reading Nand
     Done!
     in 3:30 min:sec

     Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump4.bin
     Comparing...
     Nands are the same
     Reading Nand
     Done!
     in 3:30 min:sec

     Comparing...
     Nands are the same
     Glitch2 Selected
     CR4 Selected
     Falcon Manually Selected
     ECC created
     Version: 10
     Flash Config: 0x01198010
     Writing Nand
     image_00000000.ecc
     Done!
     in 0:18 min:sec

   • Detailed Description of the Problem: Not booting to Xell
   • Was the console working before you started: Y
   • Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: Y
   • How long is the light on for each time: 1 sec

   The log below is for the Jasper

   • Console Type: Jasper 16MB
   • Programmer Used: JRP v2.0
   • NAND Size: 16MB
   • Dashboard version: 17489
   • CB Version: 6754
   • Screenshot of NAND details from J-Runner: http://imgur.com/0nXaEjj
   • J-Runner log of when it worked:
     Version: 01
     Flash Config: 0x00023010
     00023010
     Trinity, Jasper 16MB
     CB Version: 6754
     Jasper 16MB
     Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump1.bin
     Cancelled
     Version: 01
     Flash Config: 0x00023010
     00023010
     Trinity, Jasper 16MB
     CB Version: 6754
     Jasper 16MB
     Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump1.bin
     Reading Nand
     Done!
     in 3:39 min:sec

     Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump2.bin
     Initializing nanddump1.bin..
     Jasper 16MB
     Jtag Selected
     Nand Initialization Finished
     Reading Nand
     Done!
     in 3:38 min:sec

     Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump3.bin
     Comparing...
     Reading Nand
     Nands are the same
     Done!
     in 3:38 min:sec

     Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump4.bin
     Comparing...
     Reading Nand
     Nands are the same
     Done!
     in 3:39 min:sec

     Comparing...
     Nands are the same
     Glitch2 Selected
     Jasper 16MB Manually Selected
     Version: 01
     Flash Config: 0x00023010
     Writing Nand
     JASPER_CR4.ecc
     Done!
     in 0:18 min:sec

   • J-Runner log of when it didnt work: Tuesday, October 06, 2015 10:30:42 PM

     J-Runner v0.3 Beta (7) Started

     WARNING! - Your selected working directory already contains files!
     You can view these files by using 'Show Working Folder' Button

     Checking Files
     Finished Checking Files
     Downloaded *xeBuild/17349/_glitch.ini
     Downloaded *xeBuild/17349/_glitch2.ini
     Downloaded *xeBuild/17349/_glitch2m.ini
     Downloaded *xeBuild/17349/_jtag.ini
     Finished Checking Files
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Version: 00
     Wrong Version.
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Could not find a part of the path.

     ================================================== =
     Tuesday, October 06, 2015 11:07:37 PM

     J-Runner v0.3 Beta (7) Started

     WARNING! - Your selected working directory already contains files!
     You can view these files by using 'Show Working Folder' Button

     Version: 01

     Flash Config: 0x00000000
     Can not Continue
     Checking Files
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Finished Checking Files
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Version: 01
     Flash Config: 0x01198010
     01198010
     Xenon, Zephyr, Opus, Falcon
     CB Version: 5774
     Falcon/Opus
     Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump1.bin
     Cancelled
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Version: 01
     Flash Config: 0x00000000
     Can not Continue
     Version: 01
     Flash Config: 0x00000000
     Can not Continue

     
     
   • Detailed Description of the Problem: Not reading nand
   • Was the console working before you started: Y
   • Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: N
   • How long is the light on for each time: N/A

2. chuckemz Newbie

   Joined:

   May 14, 2014

   Messages:

   7

   Likes Received:

   0

   Trophy Points:

   0

   clean up those nand points completely and try wiring to the back of the board to see if it will work

3. 

   bigbadbazza Newbie

   Joined:

   Nov 4, 2015

   Messages:

   2

   Likes Received:

   1

   Trophy Points:

   0

   Gender:

   Male

   Location:

   UK

   Console:

   Xbox

   Well in my experience f lash Config: 0x00000000, usually appears if one or more of the nand points are not soldered correctly.

   Most of the time it's probably a cold solder joint or your JR Programmer wires are not wired correctly.

   Other possibilities include, a faulty JR Programmer/Nand-X.

   Make sure to use flux and clean up any flux with isopropyl alcohol to ensure non of your points are shorting out and your points are all clean.

   As a last resort, if you are using a clone JR Programmer or 3rd party nand flasher, I would suggest reading/writing the nand with alternative software, specifically nandpro 20b or try different nandpro versions until you find one which reads/writes the nand correctly.

   I had this issue using an old Matrix USB Spi nand programmer, and using nandpro 20b worked first try for me.

   Hope you get this sorted mate.

Share This Page

andersonthunt1937.blogspot.com

Source: http://www.xpgamesaves.com/threads/jr-programmer-v2-rater-and-rgh2-questions.134845/

Share this post